One-Click Proxies: How GetAntik Works with HollyProxy
Buying, checking and assigning proxies without copy-pasting IPs: how the HollyProxy integration inside GetAntik's proxy manager saves teams hours.
Buying proxies is the part of multi-accounting that almost never shows up in case studies about scaling 200 accounts, but it eats more time than people expect. You pick a provider, figure out the IP type, pay, get a login-password pair or an IP:port list, paste it into a profile, check that it actually works, and repeat the whole thing another 50 times once your profile pool grows. When proxies come from one vendor and the browser is a separate tool, there's always a manual step in between: copy, paste, don't mix up the profile.
The HollyProxy integration removes that step. You buy a proxy directly from inside GetAntik, it lands in the proxy manager immediately, and it can be assigned to a profile in one click — no copying strings into a notepad, no second browser tab.
Why this is even a problem
With five profiles, the pain isn't noticeable — you buy a proxy once, paste it once, and it runs for months. The problem shows up around 30–50 profiles, especially for teams testing new geos, launching fresh accounts every week, or running short-lived accounts that need a new IP almost as soon as they're purchased.
At that scale, the typical picture looks like this:
- Proxies get bought in batches "just in case," from different providers, because one ran out of its quota and another raised prices.
- The IP:port:login:password list lives in a spreadsheet that drifts away from reality — some proxies are already dead, others aren't linked to any profile at all.
- Assigning a proxy to a profile is manual: open the profile, open the spreadsheet, find a free row, copy, paste, mark it as used.
- Checking whether a proxy is alive either never happens or happens on a third-party site, and the result isn't saved anywhere.
Each of these is a source of errors: a profile keeps running on a proxy that died weeks ago, or two profiles accidentally end up on the same IP — which looks suspicious to a platform even when the underlying work on each account is entirely legitimate.
What the integration actually gives you
GetAntik's proxy manager is more than a field for pasting an address. It's a standalone list of saved proxies with checks, exit IP, country and status, plus built-in rotation links where the provider supports it. The HollyProxy integration adds one more step earlier in the chain: the purchase itself.
In practice it works like this:
- You open the HollyProxy purchase flow right inside the proxy manager, without leaving the app or logging in anywhere else.
- You pick the proxy type and geo your task needs — more on that below.
- The newly bought proxy appears in the shared list with everything else, connection details already filled in.
- It gets checked by the same mechanism as every other proxy — you see status, exit IP, country.
- You assign it to one or several profiles from the shared pool, without copying any strings by hand.
The difference isn't that something new became possible — you could always buy a proxy from any provider. The difference is that the manual data transfer between "bought" and "working in a profile" disappears, and with it the typical mistakes: pasting into the wrong profile, or forgetting to check before launch.
A step-by-step scenario: from zero to a working profile
Take a team that needs to launch 10 new profiles for a new geo test — say, testing an ad account across five different countries, two profiles per country.
Step 1. Plan ahead. Before buying, decide on the proxy type for the task. If you need a stable, long-lived session with low risk, residential or ISP proxies are the better fit; if the task is bulk and short-lived, datacenter proxies work fine and cost less. The trade-offs between types are covered in detail in the article on choosing a proxy type for a specific task — worth reading before any large purchase, because a wrong type choice costs more than whatever you save on price.
Step 2. Buy. In the proxy manager, pick quantity, country and type; the purchase goes through HollyProxy without leaving the app. Ten proxies across five countries, two per country, take a few minutes instead of ten separate visits to a provider's website.
Step 3. Check. Every purchased proxy gets checked, automatically or manually: real exit IP, country, response time. If a proxy fails the check, it shows up right away in the list, and you can swap it out before it ever touches a live profile.
Step 4. Assign. The proxy gets linked to a specific profile. It matters that the proxy's country matches what the profile is supposed to represent — timezone, interface language and geolocation in GetAntik are pulled from the proxy's exit IP automatically, so a mismatch here immediately shows up as an inconsistency in the fingerprint.
Step 5. Launch and monitor. The profile launches, the team works. Once a week, or before an important action (logging into a billing panel, changing settings), it's worth re-checking the proxy through the same manager — instead of finding out about a problem after access gets blocked.
The main profile list already shows which proxy belongs to which profile, its country and status — which removes the need for a separate registry spreadsheet that's bound to go stale.
Where teams most often get it wrong
One proxy for several "independent" profiles. If the goal is to genuinely separate clients or accounts, profiles that a platform is supposed to see as different users shouldn't share an IP. Saving money on proxies here creates a risk far more expensive than the saving itself. A proxy is only part of the defense, though — without a consistent browser fingerprint (OS, timezone, fonts, WebGL), one IP shared across different profiles still gets flagged by the platform. What consistency actually requires is covered in the article on fingerprint consistency across a profile.
Buying "just in case" without linking to a profile. A proxy that sits bought and unused still burns budget (most providers charge by traffic or by rental period) without doing any work. The proxy manager shows which entries aren't attached to any profile — worth checking monthly, especially if several people on the team can buy proxies independently of each other.
Proxy geo not matching the target market. If a profile is supposed to look like a user from Germany but the proxy was bought in the Netherlands because it was cheaper, the platform will see a mismatch between IP, timezone and interface language. This isn't theoretical — most modern defense systems on ad platforms and marketplaces cross-check exactly these parameters.
No regular checks. Proxies die — a provider rotates its IP pool, paid traffic runs out, a rental period expires. Without checks, this gets discovered at the worst possible moment: trying to log into an account, or in the middle of launching a campaign. Built-in checks in the proxy manager solve this in seconds, as long as they're actually used regularly and not just during initial setup.
Manual tracking in a separate spreadsheet. The moment a parallel source of truth appears — an Excel file with IPs and passwords — it starts drifting away from the real state of your profiles. Sooner or later someone assigns a proxy that the spreadsheet says is "free" but is already in use. A single list inside the proxy manager removes this risk, as long as it genuinely becomes the only source of data instead of being duplicated elsewhere.
When the integration pays off the most
The time savings aren't the same for everyone — some scenarios benefit noticeably more from a single flow for buying and assigning proxies:
- Frequent scaling. Agencies and media-buying teams that regularly add new geos or new accounts buy proxies constantly, not as a one-time event. Every extra minute of manual data transfer multiplies by the number of iterations.
- Short-lived profiles. If a profile lives for a week or two and its proxy needs quick replacement, the speed of buying and assigning directly affects how much time the team loses on upkeep instead of actual work.
- Distributed teams. When different people buy and assign proxies for their own profiles, a shared interface cuts down on confusion — no need to send logins and passwords to each other in chat.
- Tracker-based workflows. Teams that tie clicks, proxies and accounts together through a tracker need proxy-to-profile assignment to be predictable and recorded in one place — covered in detail in the article on linking a TDS tracker with proxies and profiles.
If you only run a handful of long-lived profiles, the benefit of a unified interface is smaller — buying manually once every few months isn't painful. Even then, though, keeping proxies in the same list as the profiles themselves beats maintaining a separate file.
Budget and cost visibility
A separate proxy purchase from a third-party provider often gets lost in a team's overall spending — the payment shows up as its own line item, not tied to any specific profile or client. When the purchase happens inside GetAntik and the proxy is assigned to a profile right away, it becomes easier to see what maintaining a specific account or client actually costs — especially for teams calculating unit economics per profile, as described in the article on calculating a team's budget for profiles. Proxies are one of the biggest variable costs in that calculation, and the more clearly you can see which proxy belongs to which profile, the easier it is to spot waste: unused proxies, duplicate purchases, an overpriced proxy type where a cheaper one would have worked fine.
Scale: from dozens to hundreds of proxies
At a few hundred profiles, manual proxy management turns into a job that needs a dedicated person. A single proxy manager with one-click purchasing cuts that workload, but it doesn't replace the need for structure: grouping by geo, by client, by task type. If your profile pool is already growing past a couple of dozen, it's worth thinking through a naming and grouping system ahead of time — covered in the article on organizing hundreds of profiles without chaos. Proxies in that system are tracked the same way profiles are, and should be grouped by the same criteria.
What changes with the integration
| Step | Without integration | With proxy purchase inside GetAntik |
|---|---|---|
| Purchase | Separate website, separate login | Inside the proxy manager |
| Data transfer | Manual copy of IP:port:login | Proxy lands directly in the shared list |
| Check | Third-party checker or manual | Built-in check with status and exit IP |
| Assignment to a profile | Pasting a string into profile settings | Pick from a list, one click |
| Tracking usage | Separate spreadsheet | Visible directly in the proxy and profile lists |
FAQ
Can we keep using proxies from other providers? Yes, the HollyProxy integration is an additional way to buy proxies, not the only one. Any HTTP or SOCKS5 proxy bought anywhere else can be added to the manager manually and works exactly the same way: with checks, status and profile assignment.
Do we pay HollyProxy separately from our GetAntik subscription? Buying proxies through HollyProxy is billed separately from your GetAntik plan — it's a purchase from a third-party provider, and the integration simply removes the need to switch between services.
What happens if a purchased proxy stops working? This shows up in the proxy manager's check status. A profile with a dead proxy can be switched to another one from the list without rebuilding the profile's settings from scratch.
Does this work for teams where one person buys proxies and another assigns them? Yes, as long as both have access to the shared profile and proxy pool with the right role. You can read more about team roles and permissions in the team management section.
How do we know which proxy type to buy for a given task? It depends on the platform's requirements and how long the profile needs to stay alive — residential, ISP, datacenter and mobile proxies all look different to defense systems. The comparison is covered in the article on proxy types for multi-accounting.
If you haven't tried buying proxies directly from inside an antidetect browser yet, the easiest way to see the difference is on a small profile pool — for example, on the free plan with three profiles or on the Starter plan. The full list of plans and limits is on the pricing page, and you can install the app for macOS or Windows from the download page.